Clik here to view.
Other RP2040 boards • Re: Own board - messed USB!
Thank you arg001 - this is really informative. I've hacked the power issue. Guess I'll just lay it out again but better informed.Statistics: Posted by stevemuio — Fri Jul 05, 2024 9:28 am
View ArticleInterfacing (DSI, CSI, I2C, etc.) • CM4 UART issues when migrated from...
Hi,I used CM4 UART (GPIO4 = TXD3, GPIO5 = RXD3) with Bullseye. It worked well. Now migrated my image to Bookworm and can read/write to/from that UART.I see all UARTs activated: with Bullseye I used...
View ArticleOff topic discussion • Re: Why did Dride Dashcams fail?
Dride took on an ambitious project but struggled with the technical challenges of implementing a complete dual-camera system on the Raspberry Pi. Using the CSI port for the front cam was a good start,...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: SN65DSI84 based solution non-working...
Code: hfront-porch = <16>;Is likely to be the issue, as found to be the issue on viewtopic.php?t=373083.The RP1 DSI PHY seems to be slower to transition from LP to HS than vc4, and also...
View ArticleBeginners • Re: Unable to flash and use PICO on Mac
Tried with a Windows based laptop, same results. No port !Statistics: Posted by Rob66 — Fri Jul 05, 2024 9:38 am
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: CM4 UART issues when migrated from...
Did you mean that you can't access that UART? Give concrete examples - how are you trying, what are the errors, etc.Note that with newer kernels, UART3 should end up on ttyAMA3 - the mapping is...
View ArticleGeneral discussion • Re: Flash the eMMC
The purpose of asking this question is for mass production. Burning one CM4 for 30 minutes is not mass-produced, it is unacceptable to only produce 16 units in a day.Statistics: Posted by zoro86227 —...
View ArticleOff topic discussion • Porting Windows mobile to modern Android devices
Most of the people love how the Windows mobile os looks. The major complain is the app support which is also the major reason of its extinction.So I was wondering if its possible to port Windows...
View ArticleCamera board • Re: Camera Module 3 Wide - Cannot allocate memory
On reflection, I see no particular reason why could couldn't stop the camera while you're waiting. Though it depends on the camera driver, I think mostly they will power down while the camera is...
View ArticleClik here to view.
Raspberry Pi Connect • Re: WISH LIST
This isn't Pi hardware in the future, this is beta software and providing feedback is actually part of using beta software.Yes they have loads of ideas already and know how they wish to spend time,...
View ArticleBeginners • Re: Multiple devices to the same ADC Input
You are assuming that a powered-down device will have a well-defined (and preferably very high) resistance between the output and ground. In general, this isn't true; if you apply a signal to a pin of...
View ArticleGeneral discussion • Re: RPi 5 as a desktop daily driver?
- Widevine support for DRM content if you don't know how to do, it does it for youThat works out of the box on RPiOS version.Statistics: Posted by dom — Sat Jul 06, 2024 10:05 am
View ArticleRaspberry Pi OS • Re: Openvpn installl on Bookworm (RPi5)
This is resolved to a certain extent, in that it was Human error...ie Human ...ME.The issue I totally overlooked was that OpenVPN is basically installed as part of Bookworm, so the script I was using...
View ArticleBeginners • Re: Getting external storage to work with Raspberry Pi 5
Hi, I'm an absolute beginner with stuff like this so apologies if this is a really simple fix but I cannot figure it out.I've just got a Raspberry Pi 5 which I intend to use as a streaming box with an...
View ArticleGeneral discussion • Re: How does Raspberry PI 5 Power
You can drive servos from the 5V pin of the Pi.You can, but it's not a good idea, especially if the servos are relatively powerful.Well, what if they're just reasonably powerful, or not particularly...
View ArticleTroubleshooting • Re: Faulty Raspberry Pi Zero?
Is this swap space issue somehow related to Bookworm? I don't remember having freezing issues with Stretch/Buster.Statistics: Posted by pygmalion — Sat Jul 06, 2024 10:47 am
View ArticleAdvanced users • Re: How do I make my rpi boot faster?
For reference my Pi Zero 2W takes:Code: pi@raspberrypi:~ $ systemd-analyzeStartup finished in 6.670s (kernel) + 16.270s (userspace) = 22.941s graphical.target reached after 16.176s in...
View ArticleClik here to view.
Off topic discussion • Re: Which connector is required to connect a hard drive
I have a SAS 6Gbps HDD https://serverorbit.com/hard-disk-drives/sas-6gbps/. Also send me a link of it's connector.It's difficult to tell from your link what type of drive interface it uses and what...
View ArticleClik here to view.
Troubleshooting • Re: No sound available in default Pi5
Code: raspinfo | pastebinitand post the url of the log file.Here you go https://paste.debian.net/hidden/42de2257/ThanksStatistics: Posted by AmigaBerry — Sun Jul 07, 2024 10:17 am
View Article