Beginners • Re: Intermittent Screen Blanks
Wow, thanks for your informative reply. My new info may not be necessary but here it is anyway:I plugged my 60" SAMSUNG to 3B Pi and it booted perfectly and NO Screen Blanks so I took a look at the...
View ArticleBeginners • Add desktops & xscreensaver
Just getting back into Raspbien again after being away.A couple apps I'm struggling with1. Raspbian seems to be stuck at just one desktop. obconf seems to not be able to add additional desktops.obconf...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Innomaker ov9281 vs Raspberry Pi 5
Any updates on this issue?I'm upgrading to Pi5 but my OV9281 is not registered. Is 'next' branch additions mentioned above already in main? my libcamera outputs:Code: $ libcamera-hello --camera=0...
View ArticleGeneral discussion • Re: Raspberry Pi 5 discussion thread
Not sure anyone asked (and got reply) recently - is 2GB (and possibly 1GB) version of Pi5I can't see a 1GB as Bookworm will default to X11 which is not really have long term support, I imagine.Not...
View ArticleSDK • Re: MPC23S17 Reset pin
The /RESET pin cannot be left floating. From the MCP23S17 datasheet:reset.JPGIt has a power-on-reset feature though so you can simply connect /RESET to 3.3V.Preferably via a resistor eg. 8K2 as used...
View ArticleAndroid • Re: Connecting Raspberry Pi 5 to a TV
What happens if you remove those three hdmi lines from config.txt and let the TV and the Raspberry Pi swap some EDID information and choose a screen size that works for both?Statistics: Posted by...
View ArticleJava • Installing JDK on PI
Hi AllNew to all this and I'm trying to install Open JDK 17, I have tried this using UI, so heading to add/remove programs, searching Open JDK and selecting all the checkboxes against all the JDK 17...
View ArticleCamera board • Re: Picamera2, does the size stream parameter crop the image ?
Thanks a lot @6by9, it works !I was expecting a bit more light sensitivity, but yes it is more sensitive !I guess that the i2ctransfer command you suggest activate both V and H binning ?Following is...
View ArticleTroubleshooting • Raspberry Pi 5 8GB wont boot from SD card
I'm having trouble booting my New Raspberry pi 5 from SD card. When I try to boot it from SD card, it gives this error. failed to open SD card "(CMD 810010 status 0)" It will boot from USB and works...
View ArticleRaspberry Pi OS • Re: Bookworm LVM rootfs
Sigh. Best intentions and all that.Unfortunately, with what you've provided there are way too many things where I'd say "you can do this, or you can do that", because of missing context, etc. I really...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: gpio export 17 out not working
sysfs for GPIO has been deprecated since 2015.With the 6.6 kernel it is now actively logging errors if a gpio driver tries to set the base GPIO number for the chip, therefore we aren't.libgpiod is the...
View ArticleGraphics, sound and multimedia • Re: Pi 5 Obsolete TV standards support… how?
Hi njhThe output from kmsprint -m isConnector 0 (44) Composite-1 (connected)704x432848x738720x576704x512720x480720x288544x380704x256720x240704x216The output from wlr-randr isComposite-1 "(null) (null)...
View ArticleGeneral discussion • Re: STICKY: PINN - An enhanced version of NOOBS.
Apologies. beta v3.8.9f is now available to fix this issue.Statistics: Posted by procount — Thu Mar 28, 2024 10:22 pm
View ArticleTroubleshooting • Re: Bookwork raspi-config wait for network
in bookworm the network app is now network manageron the command line it can be configured using nmtuiStatistics: Posted by kerry_s — Thu Mar 28, 2024 10:23 pm
View ArticleAdvanced users • Re: What are the default 802.3 ethernet settings in Bookworm?
eth0 is the deviceWired connection 1 is how its setup.click the wifi icon -> advanced -> edit connectionsto configureif your headless use nmtuiStatistics: Posted by kerry_s — Fri Mar 29, 2024...
View ArticleTroubleshooting • Re: shiny new pi 5
if the screen is the problem, why no info on the screen.the rest is just useless info that can't be used to help you.the only thing to say is "try a different screen"Statistics: Posted by kerry_s —...
View ArticleAdvanced users • Re: RPi4: Reloading VL805 firmware after boot
Thanks. Apart from the discussion about resetting the VL805, I have some new info: It seems the USB stack experiences problems, either periodically, e.g. because of EMI, or by user action when for...
View ArticleTroubleshooting • Re: V4L2 remote I/O error with IMX219 on RPi5
Can you check your kernel version with Code: uname -aIf it reports 6.1.73 then a step back to 6.1.65 with Code: sudo rpi-update d16727dshould workaround the problem.Or sudo rpi-update should get a 6.6...
View ArticleGeneral discussion • Re: EMG audio jack to RPI audio jack ?
So, if i use ADC will work?It'll help, you'll also need to verify the output of the ADC won't exceed 3V3, I'll step back now that others have a little more info to provide you with help.Statistics:...
View ArticleGeneral discussion • Raspberry Pi OV5647 camera not working
Hi All, I was able to get my raspberry pi camera to work after a long struggle. I was able to get a preview as well. But the next day I get erroe messages when I run this code:rpicam-hello -t 0...
View Article