it is possible that your new monitor (or maybe an adapter?) is not returning EDID data back to the PI, telling the PI what resolutions it supports... so the PI sets none.
you can set the resolution manually:
in /boot/cmdline.txt (add to the front/end of the line, NOT a new line)
-- IMPORTANT NOTE: for Bookworm, the file is at /boot/firmware/cmdline.txt !!
video=HDMI-A-1:1024x768@60D
(or whatever resolution you want)
you can set the resolution manually:
in /boot/cmdline.txt (add to the front/end of the line, NOT a new line)
-- IMPORTANT NOTE: for Bookworm, the file is at /boot/firmware/cmdline.txt !!
video=HDMI-A-1:1024x768@60D
(or whatever resolution you want)
Statistics: Posted by terribleted — Thu Feb 22, 2024 2:52 pm