Compute Module • Re: Flashing CM4 eMMC via I/O board slow. Advice?

Hi ,

Regarding ethernet setup, yes that is all correct. And as I mentioned, using a stock image that is compressed from the RPi website works ok, so I think the setup is OK.

FYI: I tried adding '--retry-all-error' as shown but I am getting an error message now:

https://drive.google.com/file/d/1azJ9Pb ... share_link

(). Perhaps the version of curl that is flashed onto the CM4 doesn't have that option enabled? Any other ideas here would be appreciated. I assume the original issue is still related to the CM4 pulling the .img.gz file down. Does anyone have experience with 'large' image files + this utility ? It would be good to hear if others have having success with larger images.

A quick related question: Is there a was to 'reset' the CM4's so they behave like they do when I take them out of the box? I have a handful of CM4s now were the CM4 Provisioning tool has failed, and so I am stuck using usbboot + rpiboot + dd on an Ubuntu machine to flash those. When I finally get the CM4 Provision tool working I'd like to 'reset' these CM4s so that they have the out of the box configuration set so that they will pick up the CM4 Provisioning app events.

Statistics: Posted by Piper984 — Mon Jul 29, 2024 3:07 pm

---